Navigator - 42- and 48-Inch Zero Turn Mower (2024)

As low as $18,999 or $560 per month USD

Request an Estimate

Fill Reduction

The Navigator’s patented fill-reduction system lets you bag 100%, bag 33% and mulch 67% or mulch 100%. All with its versatile cutting deck and baffle system.

“FeatherTouch” Controls

As the name implies, you don’t have to muscle the Navigator around. Its FeatherTouch controls make maneuvering tight spots virtually effortless.

More Capacity, More Productivity

The optional powered dump attachment system means less time emptying and more time mowing. An exclusive baffle design fills, evenly back to front, for maximum efficiency on large lawns.

Heavy Duty Gear Box

Superior gear with spiral-bevel cut gears. Rated at 50hp for improved durability.

Easy to Maintain

Landscape professionals can spend more time mowing and less time maintaining their commercial mower.

Deck Depth

4 5/8 inch deep deck allows for improved productivity and durability.

Blower Size

Larger diameter blower helps improve hopper fill and reduce plugging.

Engine Orientation

Orientation of the engine draws air from the front of the machine over the belts, pumps and through the engine to the rear of the machine extending driveline component life. Fuel tank pivots out for easy servicing of the engine.

• UPC 193308000282
• Starter Electric
• Steering Control FeatherTouch hand-control drive levers, low-force constant speed lever.
• Front Caster Tires 8 x 3.0-4 semi-pneumatic.
• Drive Tires 18 x 10.5-10 Multi-Trac® C/S.
• Parking Brake Wet disc, internal in wheel motor.
• Tractor Frame Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs.
• Blade Spindles Heavy Duty cast iron right-angle gearboxes.
• Electrical 12 volt battery with 15-amp alternator
• Seat Commercial grade high back contoured foam padded with hinged mounting.

• Transmission Brand Hydro-Gear
• Transmission Speeds Infinitely Variable
• Engine Brand Kohler
• Engine Model CH740
• Engine Displacement 725
• Transmission Hydrostatic
• Engine Series Command™
• Speed Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse.
• Drive Hydro-Drive
• Engine Spec 3182
• Engine Speed 3,600 rpm
• Air Filter Heavy-duty canister air filtration
• Fuel Capacity 7.5-gallon (28.4-L), pivoting tank for easier engine service.
• Drive Description New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors.
• Fuel Type Gas Carbureted
• PTO Engagement Lever-actuated clutching belt with 6" brake band.
• Drive Wheel Release Allows movement without engine running.
• Fuel Indicator Translucent Visual
• Deck Lift Deck latch for easier height of cut adjustment
• Carb Compliant No
• Safety Package Operator Presence Controls (OPC) and drive system interlock.
• ROPS Optional 2-post foldable ROPS with seat belt and latch.

• Deck Style Floating Deck
• Deck Style Description Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly.
• Width / Cutting Deck 42"
• Deck Construction 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.
• Cutting Heights 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments .
• Blade Tip Speed Approximately 18,500 fpm.
• Bag Capacity 9.5 bushel (76 gallons)
• Blades 2 Blades at 22" Length

• Width 43.2 in. (109.7 cm)
• Height 51.2 in. (130.0 cm)
• Length 91.8 in. (233.2 cm)
• Curb Weight 1173